Top 10 Best Cordless Finish Nailers
Are you a carpenter? Sure, you are or you would not be browsing around our best cordless finish nailers review. However, if you are new to woodwork one thing is for sure, this is one important tool to keep in your DIY arsenal at home. You get two different types of nailers, the cordless finish nailers also known as the nail guns and the brad nailers.
Whether you make furniture at home or a contractor building homes you cannot do without this powerful tool. For driving nails into wood, it is potent and the good news is you do not need a hammer. You can buy them in different models from butane, propane, compressed air, and more. But if you want to make your work, easier using the best cordless finish nailers discussed here can help you to get your job done quickly.
Also, see: Best Cordless Hammer Drills In 2021
10. Dewalt 20V Max Cordless Angled Finished Nailer
For fastening baseboard, a door & window casing, trimmings, and crown & base moldings the DCN660D1 will not disappoint you. With the built-in light, you can use it to illuminate your workspace and view the tools diagnostics. For increased production speed, this model of cordless finish nailers have a sequential mode and fires up to 800 nails per charge.
9. Ryobi P320 Cordless Nail Gun
For the best entry-level nail finisher, the Ryobi P320 is a brad nailer and suitable for installing roofing tiles, reinforce joints, and more around the home. The power tools powered by a 4amp hour battery sold separately. You can equip it with any of the Ryobi One+ systems. It allows to fire up to 700 nails that are up to 50mm long. You can adjust the depth with the dial and it has a built-in LED light.
8. Hitachi Finish Nailer
The 15-gauge angled cordless finish nailer from Hitachi is ideal for installing base & crown moldings. You can use it on chair rails, cabinets, and door & window casings. For use in tight spots, the power tool works perfect and it has a built-in air duster to keep the workplace clear from dust. No matter what your carpentry skills are this is a beast of a tool for any beginner to professional to use. A terrific tool noticeable on the equipment is the tip cap storage but does need improvement.
7. Porter-Cable DA250C Nailer Kit
For easy placement and positioning when in need of hammering in nails, you need the Porter-Cable. With the internal piston, catch mechanism it keeps a consistent power and has a non-marring nose tip to prevent tool marks on the wood. Installing base and crown molding is effortless with this cordless nail finisher.
6. Senco Cordless Finish Nailer
For taking care of difficult nailing jobs, you need the Senco another model with an operating pressure of 70-120 PSI. You can use it with bright 15-gauge and galvanized nails. For exterior and interior trim work such as crown and base molding, it is perfect to use.
5. Porter-Cable Battery-Powered Nail Gun
The PCC792LA is a cordless nail finisher powered by a 20V Lithium battery. The 16-gauge nail gun needs no compressor, gas cartridge, or hose to use it. You get consistent firing powering to use with different materials. There is a blue LED light built-in with a dual function to notify you of errors and illuminates the workspace.
4. Ryobi P330 Cordless Nail Gun
Compared to the previous Ryobi model the P330 has a similar design and powered by a Ryobi 18V One+ system with Airstrike Technology. The setup is fast and portable to use at home or at any job site. You can drive up to 750 nails on a full charge but does not have a trigger or safety lock. The tools equipped with a LED light to work in dark spaces.
3. Senco Fusion Finish Nailer
The 5N0001N nail gun has a powerful design and gives you a reflex-shot design when pulling the trigger. The tool has an aluminum drive cylinder and nose-mounted LED light for cordless finish nailers. For cordless use, it has an 18V Lithium battery with a thumbwheel to adjust the depth of the drive. The belt hooks adjustable and it only works with one battery.
2. Hitachi NT186DM Straight Finish Nailer
Compared to other cordless finish nailers, nothing is more portable in design to use than the NT186DM. The cordless finish nailers comprise a 3.0Ah Lithium battery and has a compact design. You get a LED light built in that is handy to use in low light conditions. To prevent accidental firing it has a side-lock. You can mount the pivoting belt hook to either side of the tool to use with any hand. You can drive in up to 1500 nails per charge.
1. Dewalt D51276K Cordless Finish Nailer
The following 70-120 PSI nail gun from Dewalt is a next-generation model. You can use the device as an oil-free or oil-lubricated power tool. It can complete a wide range of jobs and takes 1-2 ½ -inch straight 15-gauge collated nails. You get loads of tool-less benefits such as the nail depth adjustment, front opening to release jammed nails and more.
What is the Difference between a Brad Nailer and Finish Nailer?
You want to buy a cordless finish nailer but cannot decide if you need the brad or finish nailer or even both. The problem is that the design looks similar. Furthermore, both provide you with accuracy and precision. So what is the difference between the brad nailer and finish nailer? In short, the finishing nailer you use to end projects and not throughout the task. So to help you decide if you need only one or both, we have compiled a comparison between the two for you here.
What to Choose in a Cordless Nailer
When compared, the cordless finish nailer shoots a 16-gauge or a 15-gauge nail while the brad nail gun shoots 18-gauge nails. With the brad nailer, you can do delicate trimmings, and it does not split the trim. The finish nailer drives a thicker nail and has a holding strength.
However, the brad nailer you can use to attach a thin trim or molding without using putty. On the other hand, the cordless finish nailer is ideal to use on woodworking jobs and carpentry, where you need to use putty in the hole.
Comparison between the Brad Nailer and Finish Nailer
|BRAD NAILER||FINISH NAILER|
|TYPE OF NAIL||THIN 18-GAUGE NAILS||15-GAUGE AND 16-GAUGE NAILS|
|HOLE SIZE||0.0475-INCHES||UP TO 0.0720-INCHES|
|CAPACITY||HAS LESS HOLDING POWER||CAN WITHSTAND A HIGHER LOAD|
|USES||SUITABLE FOR USE ON THIN TRIMS||SUITABLE TO FINISH DOOR CASINGS, FURNITURE, AND CARPENTRY WORK|
|BEST TO USE ON MOLDINGS AND LIGHTWEIGHT BOARDS||CAN USE ON MDF, PLYWOOD, BASEBOARDS AND MORE|
The Brad Nail Gun
The appliance works like a nail gun, but it does not shoot the nails. Instead, it shoots brads that are a thin nail with an average 18-gauge size. Therefore, the size of the hole is about 0.0475-inches and small.
So you can only use the device to apply thin finishes on trimming to prevent it from breaking or splitting. The tool has a practical design to keep around in your tool collection. So if ever you do need to apply mold or trimming in woodwork or carpentry projects, it can help.
Another notable thing is that you should never use a hammer on the nail head if it is not through as it can easily bend and cause damage to the project. Instead of hammering, pull the nail out and do it over again.
The Pros of the Brad Nailer
- An excellent tool to add moldings and trimmings
- Does not split the trim as it uses a thin brad instead of a nail
- Gives a small hole that does not need filling with putty
- Can use the device on plywood up to ½ -inch or small baseboards
The Cons of the Brad Nailer
- Does not work on large boards, moldings, or heavy wood
- Not suitable to use in tight spaces or hard to reach corners
The Cordless Finish Nailer
The use is similar to the brad nailer, but compared to the brad model, you do not use the tool throughout your project. The only time you use the finishing nailer is to put a trim or molding on compared to using your regular nail gun.
The device has a more robust design and can accommodate from one-inch up to two and a ½ -inch nails in length. The pins have a headless design and blend in well with wood. However, it makes removing the nail difficult.
The Pros of the Finish Nailer
- Works with two types of nails the 15 and 16-gauge nail
- Provides a higher holding strength
- Suitable for building furniture, woodworking, plywood, oversized baseboards, and crown molding
- Versatile to use with different projects as it has a cordless design
- Can reach into corners
The Cons of the Finish Nailer
- Produces larger holes and you need to apply a filler adding to your work
- Not made for small trims or using on narrow boards
As you can see, there are similarities, and both you use for specific tasks. Compared to other nail guns, both these tools use smaller nails, but you cannot use them interchangeably. Here are the differences:
- Hole Size – both create different-sized holes, and with the finish nailer, you need to fill the holes with putty, but with the brad nailer, you may need a little bit of filler.
- Nails – the brad nailer only uses 18-gauge brads while the finishing nailer works with both 15 and 16-gauge nails
- Power – the finishing nailer offers more control as you use it on thick or heavy trims while the brad nailer is more suitable for thinner trimmings and moldings needing less power
- Uses – the brad nailer does not crack your thin pieces of wood and works well in corners when you do carpentry causing less damage compared to the finishing nailer
Now that you have seen the differences between the brad nailer and the finish nailer, which one should you use? Deciding which one to use all depends on the thickness and weight of what you want to use the nailer. For hardwood or thick plywood, the cordless finish nailer is the one to use.
However, if you do a lot of DIY projects and need to deal with thin wood, then the brad nailer is a useful item to have in your tool collection. You will get more use out of using the finishing nailer and recommend getting the brad nailer later on if you cannot afford both at the same time.
If you want to show wood who is boss you need one of the best cordless finish nailers here to get the job done. We hope that our Cordless Finish Nailers reviewed here helps you to find a suitable one to tackle any job at home. With the different Cordless Finish Nailers here, you can apply that skirting board quickly to get back to relaxing on the couch.
Read More: Best Cordless Rotary Tools In 2021